Silent Call Legacy Series Sleep Alert Charger

Description

Silent Call Legacy Series Sleep Alert Charger gives user the security of 24 hour monitoring while recharging the battery in the Good Vibrations, Vibracall and Omni Page receivers for the next day. Activate an optional bed vibrator or strobe light while sleeping with the Sleep Alert Charger.

Features

• Silent Call Legacy Series Sleep Alert Charger includes:
  – 1 Sleep alert charger
  – Product manual
• Plugs into any standard 110-volt electrical outlet
• Continuous 24-hour notification
• Use the Battery Charger Unit to significantly increase battery life
• Also available (sold seaprately):
  – Silent Call Vibra Call Receiver (Code VC4002-2)
  – Silent Call Omni Page Receiver (Code OP1097-2)
  – Silent Call Bed Vibrator with Pin Jack (code – VIB-PJ)

More Information

• Installation:
  – Turn the Personal receiver switch to the on position allowing it to receive incoming signals.
  – Plug the power supply attached to your Sleep Alert Charger into any standard 110 volt wall outlet.
  – Turn the Sleep Alert Charger to the “OFF” position.
  – Plug the Sleep Alert Charger wire (cable with 3.5mm jack) into the jack on the side of your Personal Receiver.
  – Plug the vibrator into the auxiliary jack on the side of the Sleep Alert Charger.
  – Place the vibrator between the mattress and the box springs.
  – Turn the Sleep Alert Charger switch to the “on” position and the RED power indicator light of the Sleep Alert Charger will come on.
• Operation:
  – Test operation by pressing the test button on any transmitter. The transmitter signal will be received by the Personal Receiver and will turn on the vibrator which is plugged into the Sleep Alert Charger.
• Reset:
  – To reset the Sleep Alert Charger, press the reset button. To reset the personal receiver, turn the on/off switch of the receiver to off and then turn it back on to receive the next transmitted signal.
• Important:
  – To receive signals from various transmitters while your receiver is charging, you must turn the Personal Receiver and Sleep Alert Charger to the “ON” position. The Personal Receiver can be charged in both the “on” or “off” position, but the Sleep Alert Charger must be in the “on” position. Leaving the Personal Receiver on charge for extended periods of time does not harm the unit.