Rolyan Solid TailorSplint Splinting Material

Description

The Rolyan Solid TailorSplint Splinting Material strikes the ideal blend of drapability and stretch resistance, making it an outstanding choice for successful splinting. From hand splints to larger orthoses, these are designed for a variety of uses. Made of non-stick, professional-grade material that is ideal for experienced splinters.

Why choose Rolyan TailorSplint ?

• Designed to be used as a wide variety of upper and lower body splints.
• Suitable for experienced splinters.
• It has easily trimmed edges.
• Made with non-stick material.
• Latex Free Product.
• Made In USA

Features of Rolyan Solid TailorSplint

• Adaptable to a wide range of applications, encompassing everything from hand splints to larger orthoses
• Balances drapability and stretch resistance to create a splinting material that is both adaptable and supportive
• Once fully molded, the splint Is able to be used indefinitely as long as it is taken care of properly
• It’s made of non-stick, low-temperature, professional-grade thermoplastic
• The TailorSplint also demands minimal shaping, using only mild strokes
• The solid sheet provides the most stability
• For one to five minutes of working time, one minute or less of water heating at temperatures of 150 to 160 degrees F is required

What to buy with Solid TailorSplint Splinting Material

• Biofreeze Professional Pain Relieving Gel
• Bell-Horn Fast Freeze Pro Style Continuous Therapy Spray
• Bell-Horn Fast Freeze Pro Style Therapy Roll-On

Care and Cleaning of Rolyan Thermoplastic Splint Material

The shelf life of low-temperature splinting materials is indefinite under the following conditions:

• Store at temperatures between 40°F and 90°F (4°C and 32°C)
• Store at less than 65% relative humidity
• Avoid prolonged exposure to light, especially ultraviolet light
• Avoid exposure to corrosive fumes and ethylene oxide fumes

Storage Instructions of Rolyan Solid TailorSplint

Temperature:

• 1/16″ (1.6mm): 150°F to 160°F (65° to 70°C) water for 30 seconds
• 3/32″ (2.4mm): 150°F to 160°F (65° to 70°C) water for 30 to 45 seconds
• 1/8″ (3.2mm): 150°F to 160°F (65° to 70°C) water for 1 minute

Time:

• 1/16″ (1.6mm): 1 minute of working time
• 3/32″ (2.4mm): 2 to 3 minutes of working time
• 1/8″ (3.2mm): 3 to 5 minutes of working time