McKesson Nasal Sampling Cannula with O2 ETCO2 Sampling

Description

McKesson Nasal Sampling Cannula with O2 ETCO2 Sampling has the Luer-Lok fastening, with over-ear nasal prongs in a 1-foot tube for extra length. This allows simultaneous O2 inhalation and end-tidal gas sampling during use.

Why choose Mckesson ETCO2 Nasal Sampling Cannula with Oxygen Delivery?

• Non-Sterile
• Green color
• Single Patient Use
• Plastic Material
• Not Made with Natural Rubber Latex

Features of McKesson ETCO2 Nasal Sampling Cannula With O2

• CO2 / O2 Cannulas
• Allows simultaneous O2 inhalation and end-tidal gas sampling
• Adult
• 10′ O2 / CO2 tubing
• With a male luer lok design
• Latex-free

What to buy with Nasal Cannula

• Hudson RCI Oxygen Supply Tubing Water Trap
• Salter Oxygen Tubing Swivel Connector – Male To Male
• Hudson RCI Nipple and Nut Hose Adaptor

How to use Mckesson ETCO2 Nasal Sampling Cannula?

• Position cannula by inserting tips into nostrils
• Thread cannula tubing over ears and adjust slide upwards for a comfortable fit under the chin
• Attach oxygen supply tube to oxygen source and luer connector to CO2 monitor
• Set oxygen to the prescribed liter flow
• Check for gas flow throughout the device
• Check positioning on device to assure proper detection of CO2

Warnings

Accuracy of CO2 monitoring can be diminsihed if the patient has a perforated septum or during a time of mouth breathing. Don not use on patients with obstructions in one or both nostrils.